RELIABLE PARTNER IN YOUR FOUNDRY, WITH HEAVY DUTY BODY AND EASY OPERATING, SKILLS THOSE ARE USER FRIENDLY MACHINES.
HAVING 5-160 LT CAPACITY MACHINES ARE, WORKING ALL OVER IN TURKEY.
Strongly constructed four column steel body. Conical,sand hopper with a vibrator motor. Butterfly-valve for the sand charge. Steel table for the core box lifting. Two side clamping units which are having hydraulic movement. Gassing plate with linear movement. The enclosure cabinet having transparent doors. The hydraylic valve unit is mounted on the machine and the hydraulic tank unit is outside the machine cabinet for easy maintenance. The pneumatic valve unit, which are in protective cabinet, is on the machine body. Electric cabinet having all automatic and manuel control panel on it,. controlled by a PLC The easy control of the machine from the outside the machine prevents the operator contact with the sand. Core shooter has double shoot cycle, side clamps on-off, ejector on-off, cycle counter, sand charge cycle standard. The shooting head has a special design and does not have any part in it for the maintenance. The compressed air tank has the shooting and discharging valves 'on it. The shooting and discharging valves are standard. Shooting head has sand level sensor. Shooting head design allows the shooting air compacts the sand to the core box with lower pressure to achieve dimensional quality and compactness..
HEAVY DUTY WEAR RESISTANCE BODY, 1-6 TON/HOUR CONTINUOUS PRODUCTION, ACCURATE RESIN DOSAGE PUMPS, STRONG MOTOR AND GEARBOX, AUTOMATIC FEED UP TO 6 CORE MACHINE, FULL AUTOMATIC PRODUCTION, EASY MAINTENANCE.
Heavy duty steel construction body. 1800 kg/hour mixing capacity. Mixer body from Hardox 400. Sand dosage tank having pneumatic gate. Dosage tank with level control sensor. Discharge pneumatic gate. Pneumatic resin pump. Pneumatic catalyst pump. Electric parts are Telemechanique. Time controlled mixing.
COLD BOX-BETASET-CO2, HIGH PERFORMANCE HEAT EXCHANGER, DOSAGE CONTROLLED PNEUMATIC PUMP, PROPORTIONALLY CONTROLLED AIR PRESSURE, 1-250 KG CORE CURING CAPACITY, CR-NI LIQUID TANK, USER FRIENDLY PLC CONTROL, EASY MAINTENANCE.
Three cabins sealed from dust. Three cabins for electric, pneumatic and heat exchanger. High performance heat exchanger with two parts having 4.5 kw each. Temperature are controlled with two thermostat. Pressure controlled gassing and purging. Volumetric pump for liquid. Air inlet 1" (GJ 100) - 1 1 /2" (G1200). Air Pressure 5,5 bar. Electronic control with Mitsubishi Alpha. Liquid tank 40 It. Gassing capacity from 5 kg to 80 kg cores. Machine dimensions are 800 x 1200 x 2000 mm
Machine Dimensions: 800 x 1200 x 2000 mm.